Centrifugal Concentrators
Centrifugal concentrators concentrate liquid samples by evaporation under vacuum. Selection depends on sample volume, vessel format, solvent and required throughput.
Herolab Auto R3
Integrated centrifugal concentrator
Auto R3 combines centrifugation, heating and an integrated vacuum pump in a compact benchtop instrument. It is the centrifugal concentrator currently offered in the Herolab range.
For sample preparation, including DNA/RNA, oligonucleotide and protein solutions. Suitability for your sample and solvent, and the required process conditions, are assessed for your application.
Enquire about Auto R3
Key technical specifications
| Speed range | 800–2,000 rpm |
|---|---|
| Maximum RCF | 530 × g |
| Ultimate pressure | < 13 mbar |
| Pump flow rate | 33 l/min |
| Timer range | 1–9,999 min |
| Dimensions (L × D × H) | 608 × 370 × 299 mm |
| Weight | 37.9 kg |
Auto R3 specifications from the linked product document. Achievable process values depend on the sample, load and operating conditions.
Rotors and system configuration
- Rotor variants for microtubes, tubes, glass vials and microplates are listed in the product document. Selection depends on vessel format and sample number.
- The vacuum pump is integrated into Auto R3. Any additional pump requirement is assessed for the application.
- The need for a cold trap or further accessories is assessed according to the solvent and process. Rotors, accessories and consumables are not automatically included in the scope of supply.
The agreed scope of supply is specified in the quotation.
Product document
Auto R3 – specifications and rotor overview (PDF, English)
Labsun Selection · Document dated 29 May 2026. Provided without modification.
Additional product information at Labsun (German)Product enquiry: Auto R3
Where available, specify sample volume, vessel format, solvent and required throughput. The Auto R3 model and this product page are automatically included in your enquiry.
Submitting this form is a non-binding enquiry, not an order.